INF file for VIA USB 3.0 drivers v6.1.7600.3105

INF file for VIA USB 3.0 drivers v6.1.7600.3105

The VIA VL800 is a single chip USB 3.0 Host controller, which enables a PCI Express equipped platform to interface with USB Super-Speed (5 Gbps), High-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) devices. The root hub consists of four downstream facing ports enabling the simultaneous operation of multiple peripheral devices. The VIA VL800 complies with the Universal Serial Bus 3.0 Specification and Intel’s eXtensible Host Controller Interface (xHCI), and is fully backward compatible with USB 2.0 and 1.1 specifications, ensuring seamless connectivity of legacy USB devices. The VIA VL800 has a PCI Express 2.0 x1 interface that is backwards compatible with PCI Express 1.0 and is perfectly suited for both PC Host and Add-In Card applications.

Type

VIA INF file

Status WHQL
Version 6.1.7600.3105 File xhcdrv.inf
Release 2012-06-18    [June '12] Size 5 KB
;/*++
;
;Copyright (c) VIA Corporation. All rights reserved.
;
; THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
; KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
; IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
; PURPOSE.
;
;Module Name:
;
; xhcdrv.INF
;
;Abstract:
; INF file for VIA eXtensible host controller
;
;--*/

[Version]
Signature = "$WINDOWS NT$"
Class = USB
ClassGuid = {36FC9E60-C465-11CF-8056-444553540000}
Provider = %VIA%
DriverVer=05/30/2012,6.1.7600.3105
CatalogFile = xhcdrv.cat

[DestinationDirs]
DefaultDestDir = 12

;-------------------------------------------------------------------------
; Device Install Section
;-------------------------------------------------------------------------
[ControlFlags]
ExcludeFromSelect = *

[Manufacturer]
%VIA%=VIA,NTAMD64

[SourceDisksFiles]
xhcdrv.sys = 1

[SourceDisksNames]
1=%DISK_NAME%,

; For XP and later
[VIA.NTAMD64]
; DisplayName Section DeviceId
; ----------- ------- --------
%XHC.DRVDESC% = xHC_Inst, PCI\VEN_1106&DEV_9201
%XHC.DRVDESC% = xHC_Inst, PCI\VEN_1106&DEV_3432
%XHC.DRVDESC% = xHC_Inst, PCI\VEN_1106&DEV_3483

[xHC_Inst.NT]
CopyFiles = xHC.CopyFiles


[xHC.CopyFiles]
xhcdrv.sys


[xHC_Inst.NT.Services]
AddService = xhcdrv,0x00000002,xHC_Service

[xHC_Service]
DisplayName = %xHC.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\xhcdrv.sys
LoadOrderGroup = Base
AddReg = SpecificParam

[SpecificParam]
HKR, "Parameters", "IMODI", 0x00010001, 1
HKR, "Parameters", "MsDelayAfterAddressBsr0", 0x00010001, 20
HKR, "Parameters", "RootPortStatusFormat", 0x00010001, 1 ; 0: by port (usb2/3 port: usb2/3 hub port status), 1: xhci
HKR, "Parameters", "MaxDmaTransferByte", 0x00010001, 0x450000; // per bob' requirement
HKR, "Parameters", "HwTriggerMask", 0x00010001, 0xFFFFFFFF
HKR, "Parameters", "MaxRootHubReEnumCount", 0x00010001, 3
HKR, "Parameters", "UsDelayBetweenSeparateTd", 0x00010001, 1000
HKR, "Parameters", "UsMinLfsBulkUrbCompletionTime", 0x00010001, 160
HKR, "Parameters", "UsMinSsBulkUrbCompletionTime", 0x00010001, 280
HKR, "Parameters", "UsMinCtrlUrbCompletionTime", 0x00010001, 0
HKR, "Parameters", "MsDelayAfterModifyIntegratedHubPp", 0x00010001, 1160
HKR, "Parameters", "FrameWindow", 0x00010001, 0x7FF
HKR, "Parameters", "DmaEnablerAlignmentRequirement", 0x00010001, 0x00000003 ; FILE_LONG_ALIGNMENT
HKR, "Parameters", "DisableUpdateFirstTrbCycleBitLast", 0x00010001, 0
HKR, "Parameters", "DisableSecondaryInterrupters", 0x00010001, 0
HKR, "Parameters", "DisableSelectiveSuspend", 0x00010001, 1
HKR, "Parameters", "DisableSimplifiedBulkHandlingOnBOT", 0x00010001, 0
HKR, "Parameters", "DisableRemoteWakeup", 0x00010001, 0
HKR, "Parameters", "DisableDynamicRootHubEnum", 0x00010001, 0

;-------------------------------------------------------------------------
; WDF Coinstaller installation
;-------------------------------------------------------------------------
[DestinationDirs]
CoInstaller_CopyFiles = 11

[xHC_Inst.NT.CoInstallers]
AddReg = CoInstaller_AddReg
CopyFiles = CoInstaller_CopyFiles

[CoInstaller_CopyFiles]
WdfCoInstaller01009.dll

[xHC_Inst.NT.HW]
AddReg = xHC_HW_AddReg

[xHC_HW_AddReg]
HKR, "Interrupt Management", 0x00000010
HKR, "Interrupt Management\MessageSignaledInterruptProperties", ,0x00000010
HKR, "Interrupt Management\MessageSignaledInterruptProperties", MSISupported, 0x00010001, 1
HKR, "Interrupt Management\MessageSignaledInterruptProperties", MessageNumberLimit, 0x00010001, 8

[SourceDisksFiles]
WdfCoInstaller01009.dll = 1 ; make sure the number matches with SourceDisksNames

[CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000, "WdfCoInstaller01009.dll,WdfCoInstaller"

[xHC_Inst.NT.Wdf]
KmdfService = xhcdrv, xHC_wdfsect

[xHC_wdfsect]
KmdfLibraryVersion = 1.9

;------------------------------------------------------------------------------
; String Definitions
;------------------------------------------------------------------------------

[Strings]
VIA = "VIA"
ClassName = "VIA USB eXtensible Host Controller"
xHC.SVCDESC = "VIA USB eXtensible Host Controller Service"
xHC.DRVDESC = "VIA USB eXtensible Host Controller"
DISK_NAME = "VIA USB eXtensible Host Controller Install Disk"

Recommended

Latest USB3 drivers (by date)

Version Date Downloads
2.0.151.24536 2020-04-17 4487×
2.0.151.24533 2019-12-06 1236×
2.0.150.10136 2019-11-20 1002×
2.0.150.24535 2019-04-22 2048×
3.8.35514.0 2019-04-06 47230×

Last added USB 3.0 drivers

Version Date Downloads
2.0.151.24536 2020-04-17 4487×
2.0.151.24533 2019-12-06 1236×
2.0.150.24535 2019-04-22 2048×
2.0.150.10136 2019-11-20 1002×
2.0.150.10104 2019-02-15 1085×

TOP 5 downloaded USB 3.0 drivers

Version Date Downloads
1.16.56.1 2019-04-01 91454×
1.0.9.254 2013-08-13 82244×
1.16.10.0 2013-07-01 63961×
2.1.39.0 2012-09-13 56383×
6.1.7600.5601 2017-08-09 52767×
Copyright © 2006 - 2012, BUBIK s. r. o. | Designed by Bajola